Lenovo A7-30GC

Lenovo A7-30GC

How to flash Stock Firmware using Smart Phone Flash Tool

These are the instruction to Flash Stock Firmware or any custom Firmware using Smart Phone Flash Tool (SP Flash Tool) on windows computer.

This applicable if your phone is on 'Boot Loop', 'Remove viruses and malware', or just need upgrade.

Requirements: Your android Phone must have at least 50% of battery level to perform the Flashing process.

Step 1: Download THIS firmware file to your computer and install driver if necessary.
Step 2: Power off or remove the battery then insert it back.
Step 3: Extract Downloaded firmware file and open SP Flash Tool end execute 'flash_tool.exe.'

Step 4: Once the app is running Click on Download Tab.

Step 5: In the Download Tab click Scatter-Loading and locate the Scatter file then click Open.

Step 6: Now, Click Download button to begin the flashing process.

Step 7: Connect the USB plug to computer and to the Phone. The red bar must be moving then violet then yellow bar will moving, if not, check USB cable or maybe drivers is not installed.
Step 8: Wait until Green Ring appear then it is completed

.